Other sample environments

In-situ shear cell
Full circle euler cradle
C-Shaped Euler cradle
Solid-liquid cell
Water baths - Julabo LH45
Programmable syringe pump
AC Impedence Spectrometer
Langmuir film balance
Stop flow mixing cell

In-situ shear cell

Ancillary code: RH-1

Used on:
Quokka (SANS)

Details to be added soon.

Full circle Euler cradle

Ancillary code: EC-1

Used on:
Echidna and Wombat (Powder Diffraction)
Quokka (SANS)
Taipan and Sika (3-Axis)

Details to be added soon.

C Shaped Euler cradle

Ancillary code: EC-2

Used on:
Echidna and Wombat (Powder Diffraction)
Quokka (SANS)
Taipan and Sika (3-Axis)

Details to be added soon.

Solid-liquid cell

Ancillary code: SL-1

Used on:
Platypus (Reflectometer)

A 100mm diameter silicon wafer cell is available for use with liquid reflectometry experiments. A range of other sizes will be available shortly 25mm diameter and 40x80mm rectangular

Programmable syringe pump

Ancillary code: SP-1

Used on:
Platypus (Reflectometer)

Holds 1 Syringe up to 60 cc and has infusion rates from 0.00073 mL/hr (1 cc syringe) to 2100 mL/hr (60 cc syringe)

AC Impedence Spectrometer

Ancillary code: AC-1

Used on:
Platypus (Reflectometer)

A spectrometer capable of measuring the impedence of a sample in the range 10kOhms to 100MOhms has been purchased. Available June 2009.

Langmuir film balance

Ancillary code: LF-1 and LF-2

Used on:
Platypus (Reflectometer)

A 100cm² and a 300cm² film balance are available for use on the Reflectometer.

A BioLogic SFM-300 stopped flow mixing cell has been purchased to study
small angle scattering from samples as a function of time after mixing. Up to three liquids may be mixed and total sample volumes on the order of 10mL are required. The equipment has been commissioned so that on mixing a trigger signal is sent and the Quokka detector begins to acquire data as a function of time.