ANSTO Nuclear-based science benefitting all Australians
ANSTO Website Search
ANSTO Youtube linkANSTO Facebook LinkANSTO Twitter Link

MECA SENS 2013  

mecasens bookmark

 

Keynote Talks (30min + 10min)

 

Laurent Capolungo Virtual diffraction for dislocation density quantifications
Henning F. Poulsen X-ray microscopy: multiscale stress and structure mapping
Yo Tomota 3D scale-bridging stress evaluation of dissimilar alloys welded thick plate

  

 

Invited Talks (25min + 5min)

 

Ke An Time-Resolved Measurements of Transient Behaviors by Asynchronous In-Situ Neutron Diffraction at the Spallation Neutron Source
Don Brown Microstructural Characterization of Activated Materials with Neutron and X-ray Diffraction
Hahn Choo Interplay Between Hall-Petch Relations & Texture in a Mg Alloy
Thomas Connolley Synchrotron Strain Measurement Facilities at I12, the Joint Engineering, Environment & Processing (JEEP) Beamline at Diamond Light Source
John Francis An Assessment of the Mechanisms of Transformation Plasticity in SA508 Grade 3 Steel during Simulated Welding Thermal Cycles
Patrice Gergaud In Depth Stress Gradient Measurement in Polycrystalline Thin Films using a Nano-Pencil Beam
Stefanus Harjo Engineering & Related Studies at J-PARC
Joe Kelleher Neutrons for Materials Science and Engineering Research at ISIS
Ismail Noyan Measurement of Load Partitioning in Suspension Bridge Cables using Neutron Diffraction
Andreas Schreyer In Situ Studies of Engineering Processes with Synchrotron Radiation and Neutrons
Tamas Ungar Microstrain from X-ray and neutron line broadening in terms of dislocation structure related to mechanical properties
Wuchuck Woo Combined use of neutron and strain relief methods to determine residual  stresses in thick welded joints


 

 

Regular Talks (15min + 5min)

 

Koichi Akita Thermal Relaxation Behavior of Residual Stress in Peened Dissimilar Weld Joints Investigated by Neutron Diffraction
Gyu-Baek An Evaluation of Welding Residual Stress Distribution in Thickness Direction with Thick Steel Plate for Identification of Brittle Crack Propagation Path
Daniel Apel Combined Analysis of Residual Stress and Microstructure Gradients from Energy-Dispersive Synchrotron Diffraction Patterns using the RIETVELD-Method
Levente Balogh The influence of fast neutron irradiation on the plasticity induced evolution of dislocation densities and operating deformation modes in Zr-2.5Nb
Philip  Bendeich Residual Stresses in a Welded Zircaloy Cold Neutron Source Containment Vessel
Abdelilah Benmarouane Characterization of New generations of implants at the interface with Bone by Synchrotron Radiation
Mirko Boin Improving Beamtime Efficiency for Neutron Residual Stress Experiments
Chedly Braham Residual stresses measured using multireflection grazing incidence diffraction with synchrotron radiation
Don Brown Stability of the two-phase (w/a) microstructure of shocked zirconium
Stefano Coratella Use of Neutron Diffraction to Validate Eigenstrain Method Prediction of Residual Stress After Laser Shock and Shot Peening
Ryan Cottam The Role of Metallurgical Solid State Phase Transformations on the Formation of Residual Stress in Laser Cladding and Heating
Catrin Davies Plastic Pre-Strain Effects on the Intergranular Strains in 316H Stainless Steel
Matthieu Dubois Study of the Influence of Plastic Deformation on the CuAlBe Shape Memory Alloy by Neutron Diffraction
Elvin Eren Evaluation of Residual Stresses in Narrow Gap Welded Gas Transmission Pipe Spools
Mike Fitzpatrick Measurement of near-surface stresses from laser shock peening
Wu Gong In-Situ Neutron Diffraction Study of Compression Behaviour in LPSO Type Mg-Zn-Y Alloys
Stefanus Harjo Residual Strains in ITER Conductors by Neutron Diffraction
Yujiro Hayashi Three-Dimensional X-ray Diffraction Microscopy using a Narrow Beam and In-Situ Observation of Plastic Deformation in Polycrystalline Iron
Tom  Holden Load-Sharing in δ-Processed Inconel 718
Nicholas Hoye Residual Stresses in Titanium Aerospace Components Formed via Additive Manufacture.
E-Wen Huang Creep study for a Nickel-Base Superalloy Subjected to Cyclic Loading and Various High Temperature
Priyesh  Kapadia Neutron Diffraction Residual Stress Measurements in Electron Beam Welded Compact Tension Specimens
Erich Kisi Stress Distribution in Iron Powder during Die Compaction
Aaron  Krawitz Thermal Residual Stresses in Cemented Carbides
Michael Law Investigations of Stress Corrosion Cracking in a Gas Pipeline
Soo-Yeol Lee Twinning-Detwinning Behavior during Fatigue-Crack Propagation in a Wrought Magnesium Alloy AZ31B
Meijuan Li Neutron Texture Diffractometer at China Advanced Research Reactor
Vladimir Luzin Temperature Induced Internal Stress in Marble
Ali Mehmanparast Quantification and Prediction of Residual Stresses in Creep Crack Growth Specimens
Satoshi Morooka In-situ Neutron Diffraction Study on Tensile behaviour in nano-crystalline ferrite steel produced by High Pressure Torsion
Jette Oddershede Strain Mechanisms in Polycrystalline BaTiO3 Measured at the Single Grain Level during In-Situ Electrical Poling
Vipulkumar Patel Finite Element Modelling of Residual Stress Field in a Welded Stainless Steel Plate (8-Pass Weld)
Thilo Pirling Multi-Peak  Analysis: New Developments for a Stress Diffractometer at a Steady State Neutron Source
Sascha Raatz Investigation of residual stress in straightened steel pipes and plates with diffraction methods
Antonio Ramirez Parallel thermo-mechanical processing and synchrotron x-ray diffraction for in-situ phase transformations studies under strain/stress conditions
Christina Reinhard A combined X-ray tomography and digital volume correlation approach to study 3D indentation
Angelika Riedl Depth-Dependent Decomposition Pathways and Residual Stresses in NanoCrystalline TiAlN Coatings Revealed by X-ray Nanodiffraction
Michael Saleh Analysis of the Residual Stress in the Cold Spray Technique using Neutron Diffraction and SPH Modelling
Mitsumi Sano Residual Strain of OFC using Synchrotron Radiation
Christian Scheffzük Strain and Texture Investigations by Means of Neutron Time-Of-Flight Diffraction: Application to Polyphase Gneisses
Michael Schöbel Residual Stresses in Continuously Cast Steel Slabs
Daigo Setoyama Crystal Plasticity Finite Element Analysis Based on crystal Orientation Mapping by Three-Dimensional X-ray Diffraction Microscopy
Ayumi Shiro In-Situ Observation of Recrystallization Process for Aluminum Single Crystals using Synchrotron Radiation
Takahisa Shobu Anneal Effect of Internal Strain in Dissimilar Materials by Laser Welding
Mike Smith How reliable are engineering diffraction stress measurements? Lessons from NeT Task Group 4 
Peter Staron Depth-resolved residual stress analysis with high-energy synchrotron X-rays using a conical slit cell
Kenji Suzuki Internal Stress Measurement of Weld Part Using Diffraction Spot Trace Method
Hiroshi  Suzuki Further Investigations on Pseudo-Strain Induced in Neutron Strain Measurement
Andrew Venter Residual Stresses Associated with the Roduction of Coiled Automotive Springs
Joanna Walsh Assessing Residual Stresses within Power Plant Welds: How Useful is Surface X-Ray Diffraction?
Krzysztof Wierzbanowski Study of asymmetric rolling of titanium by Finite Elements Method with implemented crystalline model
Johnpaul Woodhead Validation of the Forming Stresses in Spherical Bearings using Neutron Diffraction
Ryouichi Yokoyama Re-evaluation of Hall's Method: Experimental Confirmation
Suraiya Zabeen Structural Integrity Assessment of Aerospace Components with Deep Compressive Residual Stress Introduced by Laser Shock Peening
Shuoyuan Zhang In-Situ Stress Measurement in the Heat Affected Zone during TIG Welding Process

 

   
  

Presentation (Poster, max. A0 landscape)  

 

Jun Abe Strain analysis in Geological materials using Neutron diffraction and AE signal measurement at J-PARC/BL19 “TAKUMI”
Kazuya Aizawa Trial of Kink Deformation Detection of LPSO Mg85Zn6Y9 Alloys by SANS Measurements
James Boland Characterisation of thermally stable diamond composite material
Rangan K. Dutta Synchrotron Diffraction Studies on Transformation Plasticity in a High Strength Quenched and Tempered Structural Steel
Gergely Farkas Neutron Diffraction Study of Mg-Al-Sr Alloy Reinforced with Short Saffil® Fibers Deformed in Compression
Jianbo Gao Fatigue and Residual Stress Test for Stainless Steel Sample
Rezwanul Haque Measurement of residual stress in Self-Pierced Riveted joints by neutron diffraction
Mi-hyun Kang In-Situ Neutron Diffraction Measurements of Stacking Fault Energy and Dislocation Density in High Manganese Steel at Temperature
Bahar Khodabakhshi Neutron Diffraction Measurement and FEA Modelling of Residual Stresses in Aluminothermic Rail Welds
Junhong Li The New Materials Science Diffractometer RSD in CIAE
Fidelis Mashiri Residual stresses distribution measured by neutron diffraction in fabricated square high strength steel tubes
Ismail Noyan First Principles Modeling of Kinematical Diffraction Patterns in  in a Diffract-and-destroy Experiment
Anna Paradowska  Residual stress in railway rails components measured by neutron diffraction  
Jeong-Ung Park Development of Inherent Strain Method to Measure Inner Welding Residual Stress using Initial Stress Models
Chandrahas Rathod A Neutron Diffraction Investigation of Residual Stresses in Rail Ends after Severe Deformation of Rail Surfaces
Jun-ichi Shibano Evaluation of Ductile Damage Progress of Aluminum Single Crystal with Prior Activity of Single Slip System under Tensile Loading by using Synchrotron White X-ray
Kenta Shimizu Variation of Tensile Deformation Characteristics in Binary and Ternary Zr-Based Metallic Glasses Studied by In-Situ High Energy X-Ray Diffraction
Tim Slingsby Identifying and controlling residual stress in parts built using Selective Laser Melting
Shaopin Song Investigation of Residual Stresses Distribution in Titanium Weldments
Krzysztof Wierzbanowski Study of microstructure, texture and residual stress in asymmetrically rolled titanium
  

              

mecasens bottom

 		  Home
   Venue
Arrow Programme 
  Registration
  Publication
  Accommodation
  Travel & Visa
  Workshops
  Committee
  Contact Us

 

 

 

 

 

 

 

 

 

 

MECA SENS 2013 logo_blue

Important Dates:

 

  • Abstract Submission: by the 1st of June 2013 => mecasens2013@ansto.gov.au
  • Student Registration: by the 1st of June 2013 => $750.00 (AUD)
  • Early Registration: by the 1st of June 2013 => $850.00 (AUD) 
  • Full Registration: by the 31st of July 2013 => $950.00(AUD) 
  • Manuscript Submission: by the 30th of August 2013 (all papers will be published in Materials Science Forum)

Register now!