Publications 2008

 

Ahmed, R., Yu, H., Stoica, V., Edwards, L. and Santisteban, J.R., “Neutron Diffraction Residual Strain Measurements in Post-treated Thermal Spray Cermet Coatings”, 2008, Materials Science and Engineering, 1-2, pp. 191-202

 

Alexiev, D, Mo, L, Prokopovich, DA, Smith, ML and Matuchova, MAF, Comparison of LaBr3 : Ce and LaCl3 : Ce with NaI(Tl) and Cadmium Zinc, Telluride (CZT) detectors, 2008, IEEE Transactions On Nuclear Science, 55, pp. 1174-1177

 

Angeli, F, McGlinn, P and Frugier, P ‘Chemical durability of hollandite ceramic for conditioning cesium’ Journal of Nuclear Materials’, 2008, 380, pp.59-69

 

Aly, Z., Vance, E. R., Perera, D. S., Hanna, J. V., Griffith, C. S., Davis, J. and Durce, D. ‘Aqueous leachability of metakaolin-based geopolymers with molar ratios of Si/Al = 1.5–4’, 2008, Journal of Nuclear Materials 378, 172-179

 

Arrachart, G, Karatchevtseva, I. Cassidy, D.J. Triani G., Bartlett J.R., and Wong Chi Man, M. “Synthesis and characterisation of carboxylate-terminated silica nanohybrid powder and thin films”, J. Mater. Chem., 2008, 18 (31), 3643-3649.

 

Atuchin, V.V., Grivel, C.J., Korotkov, A.S., & Zhang, Z., 2008, ‘Electronic parameters of Sr2 Nb2 O7 and chemical bonding’, J. Solid State Chem., 181, pp. 1285-1291

 

Balek, V., Zhang, Y., Zeleňák, V., Šubrt, J. and Beckman, I.N., “Emanation thermal analysis study of brannerite ceramics for immobilization of hazardous waste”, 2008, Journal of Thermal Analysis and Calorimetry, pp. 155-160.

 

Barbe, C.J., Kong, L., Finnie, K.S., Calleja, S., Hanna, J.V., Drabarek, E., Cassidy D. & Blackford, M.G., 2008, ‘Sol-gel matrices for controlled release: from macro to nano using emulsion polymerisation, J. Sol-Gel Sci. Technol.,46, pp. 393-409.

 

Bhaskaran, M., Sriram, S., Mitchell, D.R.G. & Holland A., “Investigation of surface crystallites on C54 titanium silicide using transmission electron microscopy’, 2008, Semiconductor Science and Technology, 23, pp. 89-93.

 

Bhaskaran M., Sriram S., Mitchell, D.R.G., Short, K.T. & Holland, A.S., ‘Effect on multi-layered bottom electrodes on the orientation of strontium-doped lead zirconate titanate thin films’, Thin Solid Films, 2008, 516, pp.8101-8105.

 

Bhaskaran M., Sriram S., Mitchell, D.R.G., Short, K.T., Holland, A.S. & Mitchell, A., ‘Microstructural investigation of nickel silicide thin films and the silicide-silicon interface using transmission electron microscopy’, 2008, Micron, 40, pp. 89-93.

 

Bowmaker, GA, Hanna, JV, Hahn, FE, Lipton, AS, Oldham, CE, Skelton, BW, Smith, ME and White, AH, ’Structural and spectroscopic studies of some copper(I) halidetert-butyl isocyanide adducts’, 2008, Journal of the Chemical Society: Dalton Transactions, 13, pp. 1710-1720

 

Burton, E.D., Bush, R.T., Sullivan, L.A. and Mitchell, D.R.G., ‘Schwertmannite transformation to goethite via the Fe(II) pathway: Reaction rates and implications for iron–sulfide formation’, 2008, Geochimica et Cosmochimica Acta, 72, pp. 4551-4564

 

C.S. Cutler, S. McQuarrie, and Smith S.V., "Imagine the Imagery: Opportunities and Challenges" 2008, Qtr. J. Nucl. Med. and Mol. Imag. Editorial, 212-214

 

Dolbin, AV, Esel'son, VB, Gavrilko, VG, Manzhelii, VG, Vinnikov, NA, Sundqvist, B, Gadd, GE, Moricca, S and Cassidy, D., ‘The effect of the noncentral impurity-matrix interaction upon the thermal expansion and polyamorphism of CO-C-60 solid solutions at low temperatures’ Low Temperature Physics, 34, pp.470-475.

 

Edwards, L., Smith, M.C., Turski, M., Fitzpatrick, M.E. and Bouchard, P.J. “Advances in Residual Stress Modeling and Measurement for the Structural Integrity Assessment of Welded Thermal power Plant.”, 2008, Advanced Materials Research, 41-42, pp.391-400

 

Fernando, K., Lucien, F., Tran, T., and Carter M.L., Ion exchange resins for the treatment of cyanidation tailings: Part 3 – Resin deterioration under oxidative acid conditions’ 2008, Minerals Engineering, 21, pp.683-690.

 

Gamboa, E., Linton, V. & Law, M., 2008, ‘Fatigue of Stress Corrosion Cracks in X65 Pipeline Steels’, International Journal of Fatigue, Vol. 30, pp. 850-860.

 

Ganguly, S., Stelmukh, V., Edwards, L., and Fitzpatrick, M. E., “Analysis of residual stress in MIG-welded Al-2024 using neutron and synchrotron X-ray diffraction”, 2008, Materials Science and Engineering A, 491, pp. 248-257

 

Ganguly, S., Pratihar, S., Fitzpatrick, M.E., & Edwards, L., 2008, ‘Study of Residual Stress Distribution in a Stainless Steel Bead-on-Plate Simulation Benchmark Sample’, Materials Science Forum, 571, pp. 367-373.

 

Griffith, C. S.; Sizgek, G. D.; Sizgek, E.; Scales, N.; Yee, P. J.; Luca, V.,; Mesoporous Zirconium Titanium Oxides. Part 1: Porosity Modulation and Adsorption Properties of Xerogels, Langmuir24, pp. 12312-12322.

 

Griffith, C.S., Luca, V., Cochrane, J. and Hanna, J.V. ‘Lanthanide/actinide ion-exchange and structural investigations of the layered phosphatoantimonic acid, H3Sb3P2O14·ZH2O’ 2008, Microporous and Mesoporous Materials, 111, pp. 387-403

 

Grimes, R.W., Konings, R.J.M, and Edwards, L. “Greater tolerance for nuclear materials”, 2008, Nature Materials, 7, pp. 683-685

 

Guatelli, S., Reinhard, M.I., Mascialino, B., Prokopovich, D.A., Dzurak, A.S., Zaider, M. and Rosenfeld, A.B., ‘Tissue equivalence correction in silicon microdosimetry for proton characteristics of the LEO space environment’, 2008, IEEE Transactions. on Nuclear Science., 55, pp. 3407-3413.

 

He, L-H, Standard, O.C., Huang, T.Y., Latella, B.A. and Swain, M.V. ‘Mechanical behaviour of porous hydroxyapatite’ 200-8, Acta Biomaterialia, 4, pp. 577-58

 

Howard, C.J., Withers, R.L., Knight, K.S. & Zhang, Z., 2008, Ca0.37Sr0.63TiO3 Perovskite – An example of an unusual class of tilted perovskites, J. Phys.: Condens. Matter 20 (2008) 135202

 

Huang, S, Joso, R, Fuchs, A, Barner, L, Smith, SV, ‘Probing Solid-Liquid Interfaces Using Radiotracer Technology: Characterization of Functionalized Microspheres’ 2008, Chemistry of Materials, 20, pp. 5375-5380

 

Imperia, P., Kandulski, W., Kosiorek, A., Glaczyńska, H., Maletta, H. and Giersig, M., ‘Magnetic anisotropy study of triangular-shaped Co nanostructures’ 2008, Journal of Magnetism and Magnetic Materials 320, pp.2682-2687

 

Imperia, P., Glaser, L., Martins, M., Andreazza, P., Penuelas, V., Alessandrovic, H., Weller, C., Andreazza-Vignolle & Wurth, W., 2008, ‘XMCD Studies of Cox Pt100-x Nanoparticles Prepared by Vapour Deposition and Chemical Synthesis’, 2008, Physica Status Solidi A 205 pp.1047-1054

 

Jurisson S.C., Cutler C., and Smith S.V. "Radiometal Complexes: Characterization and Relevant in Vitro Studies." 2008, Quarterly Journal of Nuclear Medicine and Molecular Imaging., 52, pp. 222-234.

 

Karatchevtseva, I., Cassidy, D.J., Zhang, Z., Triani, Finnie K.S., Cram S.L.,Barbé Ch.J., and Bartlett J.R., “Crystallization of TiO2 G. powders and thin films prepared from modified titanium alkoxide precursors”, Journal of the American Ceramic Society, 2008, 91, (6), 2015-2023

 

Kariyawasam, S., Arumugam, U., Caller, G., Clarke, C., Hugger, A., Senf, P. & Law, M., ‘Stress-corrosion-crack detection analysis, and assessment improvements for effective integrity management”, Journal of Pipeline Engineering, Vol. 6, No. 2, pp. 89-101.

 

Kartal, M.E., Liljedahl, C.D.M., Gungor, S., Fitzpatrick, M.E. and Edwards, L. “Determination of Residual Stresses in a VPPA Weld Using the Multi-Axial Contour Method”, 2008, Acta Materialia, 56, pp. 4417-4428

 

Kealley, CS, Latella, BA, van Riessen, A, Elcombe, MM and Ben-Nissan, B., Micro- and Nano-Indentation of a Hydroxyapatite-Carbon Nanotube Composite, 2008, Journal of Nanoscience and Nanotechnology, 8, pp. 3936- 3941

 

Keegan, E., Richter, S., Kelly, I., Wong, H., Gadd, P., Kuehn, H. & Alonso-Munoz, A., 2008, ‘The provenance of Australian uranium ore concentrates by elemental and isotopic analysis’, Applied Geochemistry, 23, pp. 765-777

 

Kennedy, B. J., Saines, P. J., Zhou, Q., Zhang, Z., Matsuda, M. and Miyake, M., Structural and Electronic Phase Transitions in Sr1-xCexMnO3 Perovskites , 2008, Journal of Solid State Chemistry, 181, pp.2639-2645

 

Latella, BA, Perera, DS, Durce, D., Mehrtens, EG and Davis, J., Mechanical properties of metakaolin-based geopolymers with molar ratios of Si/Al approximate to 2 and Na/Al approximate to 1, 2008, Journal of Materials Science, 43, pp.2693-2699

 

Latella, BA, Gan, BK, Barbe, Ch.J. & Cassidy, D.J, ‘Nanoindentation hardness, Young's modulus, and creep behavior of organic-inorganic silica-based sol-gel thin films on copper.’ ,2008, Journal of Materials Research, 23, pp.2357-2365

 

Laurencin, D, Wong, A, Hanna, JV, Dupree, R and Smith, ME ‘A high-resolution Ca-43 solid-state NMR study of the calcium sites of Hydroxyapatite’, 2008, Journal of the American Chemical Society, 130, pp.2412-2413.

 

Law M, Nolan D “Method for the quantitative assessment of transverse weld metal hydrogen cracking” 2008, Advanced Materials Research 41-42, pp 427-434

 

Law M, Linton V, Gamboa E “Fatigue crack growth comparison between sleeved and non sleeved pipeline” 2008, Advanced Materials Research, 41-42, pp 105-112

 

Law, M., Nolan, D. & Holdstock, R., ‘Method for the quantitative assessment of transverse weld metal hydrogen cracking’, 2008, Materials Characterisation, 59, pp.991-997.

 

Law, M. and Piper, J. Weld Trim Dimensional Tolerances for use with a 0.8 Design Factor”, Journal of Pipeline Engineering, 2008, 7, pp 105-112.

 

Liljedahl, C.D.M., Fitzpatrick, M.E. and Edwards, L. “Distortion and Residual Stresses in Structures Reinforced with Titanium Straps for Improved Damage Tolerance”, 2008, Materials Science & Engineering A, 468, pp. 104-111.

 

Liljedahl, C.D.M., Tan, J.F., Zanellato, O., Ganguly, S, Fitzpatrick, M. E. and Edwards, L., “Evolution of residual stresses with fatigue loading and subsequent crack growth in a welded aluminium alloy middle tension specimen”, 2008, Engineering Fracture Mechanics, 75, pp. 3881-3894

 

Liljedahl, C.D.M., Fitzpatrick, M.E. and Edwards, L. “Residual stresses in structures reinforced with adhesively bonded straps designed to retard fatigue crack growth”, 2008, Composite Structures 86, p344-355.

 

Liljedahl, C.D.M., Zanellato, O., Edwards, L. and Fitzpatrick, M.E. “Evolution of Residual Stresses with Fatigue Crack Growth in a VPPA-Welded Aluminium Alloy Compact Tension Specimen, 2008, Metallurgical and Materials Transactions A, 39A, pp.2370-2270.

 

Lumpkin, G. R., Smith, K. L., Blackford, M. G., Thomas, B. S., Whittle, K. R., Marks, N. A. and Zaluzec, N. J., ,Experimental and atomistic modelling study of ion irradiation damage in thin crystals of the TiO2 polymorphs’, 2008, Physical Review B, 77, 212401

 

Luca, V, Bertram, W. K. Sizgek, D. Yang B. and Cookson D. Delineating the First Few Seconds of Supramolecular Self-Assembly of Mesostructured Titanium Oxide Thin Films through Time-Resolved Small Angle X-ray Scattering, 2008, Langmuir, 24, pp. 10737-10745

 

Linton V., Gamboa, E. & Law, M., 2008, ‘Fatigue Crack Extension and Repair of Pipes with SCC Cracks’, Global Pipeline Monthly, Vol., 4, N.1, January 2008.

 

Marks, N.A., Thomas, B.S., Smith, K.L., and Lumpkin G.R., 2008, Thermal spike recrystallisation: Molecular dynamics simulation of radiation damage in polymorphs of titania. Nuclear Instruments and Methods in Physics Research B 266, 2665-2670

 

Mak, J., Wuhrer, R., Heness, G., Yeung, M.D., Callaghan, M.D., Wei, T., Qin, J., Lu, W. and Zhang, D., Small Punch Test of Advanced In Situ Synthesized Ti Metal Matrix Composites, 2008, Advanced Materials Research, 47-50 , pp738-741.

 

Minakshi, M, Mitchell, DRG and Prince, K., Incorporation of TiB2 additive into MnO2 cathode and its influence on rechargeability in an aqueous battery system, 2008, Solid State Ionics, 179, pp.355-361.

 

Mitchell, D. R. G., Triani, G. and Zhang, Z., Hydrothermal crystallization of amorphous titania films deposited using low temperature atomic layer deposition 2008, Thin Solid Films 516, 8414-842

 

Mitchell, D.R.G., ‘Circular Hough transform diffraction analysis: A software tool for automated measurement of selected area electron diffraction patterns within Digital Micrograph’, 2008, Ultramicroscopy, 108, pp. 363-374.

 

Mitchell, D.R.G., Wang, X. & Caruso, R.A., ‘Plasmon imaging: An efficient TEM-based method for locating noble metal particles dispersed on oxide catalysts at very low densities’, 2008, Micron 39, pp.344-347.

 

Mitchell, D.R.G., ‘DiffTools: Electron diffraction tools for DigitalMicrograph™, 2008, Microscopy Research and Technique, 71, pp.588-593

 

Moffatt. J. and Edwards, L. “Effect of Frequency on Ambient Temperature Fatigue Crack Growth in a Silicon Carbide Reinforced Silicon Nitride Composite” 2008, International Journal of Fatigue, 30, pp.1289-1297

 

Murَansky, O., Carr, D.G., Šittner, P., Oliver, E.C. & Dobroň, P ‘In-situ neutron diffraction studies of the pseudoelastic-like behaviour of hydrostatically extruded Mg-Al-Zn Alloy’, 2008, Materials Science Forum,  571-572 pp. 107-112.

 

Muránsky, O., Šittner, P., Zrník, J. and Oliver, E.C,In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures”, 2008, Acta Materialia, 56, pp.3367-3379

 

Muránsky O,, Šittner, P., Zrník, J. and Oliver, E.C., “The structure dependence of deformation behaviour of TIPR-assisted steel monitoring by in-situ neutron diffraction”, 2008, Metallurgical And Materials Transactions A, 39A, pp.3907-3104

 

Muransky, O., Carr, D.G., Barnett, M.R., Oliver E.C. & Sittner, P., ‘Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg Alloy in situ neutron diffraction and EPSC modelling’. Muránsky, O., Carr, D.G., Barnett, M.R., Oliver, E.C. and Šittner, P., 2008, Materials Science and Engineering A, 496, 14-24

 

Norman, J, Shapter, JG, Short, K, Smith, LJ, and Fazzalari, NL,’Micromechanical properties of human trabecular bone: A hierarchical investigation using nanoindentation’2008, Journal of Biomedical Materials Research, 87A, pp. 196-202

 

Naeini, M.S., Lerch, M.L.F., Petesecca, M., Pignatel G.U., Reinhard, M. & Rosenfeld, A.B., 2008, ‘Evaluation of pixellated back-sided planar photodectors for high-resolution imaging instrumentation’, Nucl. Instr. & Meth. In Phys., Res. A., 2008, 589, pp. 259-267.

 

Park, B.G., Crosky, A.G. and Hellier, A.K. ‘High cycle fatigue behaviour of microsphere Al2O3–Al particulate metal matrix composite’ 2008, Composites Part B: Engineering, 39, pp. 1257-1269

 

Park, B.G., Crosky, A.G. and Hellier, A.K. ‘Fracture toughness of microsphere Al2O3–Al particulate metal matrix composites’2008, Composites Part B: Engineering, 39, pp. 1270-1279

 

Perera, D.S., Hanna, J.V., Davis, J., Blackford, M.G., Latella, B.A., Sasaki, Y. and Vance E.R., ‘Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials’, Journal of Materials Science, 2008,  43, pp.6562-6566

 

Provis, J L., Walls, P A., and van Deventer J.S.J., ‘Geopolymerisation kinetics. 3. Effects of Cs and Sr salts’ 2008 Chemical Engineering Science, 63, pp. 4480-4489

 

Prokopovich, D.A., Reinhard, M.I., Cornelius, I.M. and Rosenfeld, A.B., ‘SOI Microdosimetry for Mixed Field Radiation Protection’, Raiation. Measurement, 2008, 43, pp. 1054-1058.

 

Rahman, Fitzpatrick, M.E., Edwards, L., Pratihar S., Peel, M. & Buslaps, T., 2008, ‘Investigation of the stress fields around a fatigue crack in aluminium alloy 5091’, Materials Science Forum, 571, pp. 119-124.

 

Richter, S. Alonso-Munoz, A. Eykens, R. Jacobsson, U. Kuehn, H. Verbruggen, A. Aregbe, Y. Wellum, R. and Keegan E. ‘The isotopic composition of natural uranium samples—Measurements using the new n(233U)/n(236U) double spike IRMM-363T6’ International Journal of Mass Spectrometry, 269, pp. 145-148

 

Rowles, MR, Hanna, JV, Pike, Kj, Smith, ME, and O'Connor, BH, ‘Si-29, Al-27, H-1 and Na-23 MAS NMR study of the bonding character in aluminosilicate inorganic polymers’ 2008, Applied Magnetic Resonance, 32, pp. 663-689.

 

Safavi-Naeini, M. Lerch, M.L.F. Petasecca, M. Pignatel, G.U. Reinhard, M. Rosenfeld, A.B. ‘Evaluation of pixellated, back-sided planar photodetectors for high-resolution imaging instrumentation’ 2008, Nuclear Instruments and Methods in Physics Research Section A, 589, pp. 259-267

 

Saines, P. J., Kennedy, B. J., Elcombe, M. M., Harris, H. H., Jang, L. Y. and Zhang, Z., 2008, Phase and Valence Transitions in Ba2LnSnxSb1 xO6-d (Ln = Pr and Tb) Journal of Solid State Chemistry,181, pp. 2941-2952

 

Sharma, S., Turski, M., Fitzpatrick, M.E. & Edwards, L., 2008, ‘Study of Elastic-Plastic Anisotropic response of Stainless Steel Weld Metal using Neutron Diffraction’ Materials Science Forum, 571, pp. 125-130.

 

Short, K. T., Zhang, Z., Finnie, K., Collins, G. A. & Figueroa, C. A., 2008, ‘A new duplex process for corrosion protection by PI3’, Matererials Letters. 62 (2008) 3156-3158

 

Sizgek, G. D.; Sizgek, E.; Griffith, C. S.; Luca, V. Mesoporous Zirconium Titanium Oxides. Part 2: Synthesis, Porosity, and Adsorption Properties of Beads, 2008, Langmuir; 24, pp.12323-1233

 

Smith, K.L., Lumpkin, G.R., Blackford, M.G., Colella, M., and Zaluzec, N.J., In situ radiation damage studies of LaxSr1-3x/2TiO3 perovskites’, 2008, Journal of Applied Physics, 103, 083531.

 

Smith S.V., ‘Sarar Technology for the Application of Copper-64 in Biology and Materials Science’, 2008, Quarterly Journal Nuclear Medicine and Molecular Imaging, 52(2), pp.193

 

Smith S.V., Huang S., Barner L. and Yoso R. "Probing Solid-Liquid Interfaces Using Radiotracer Technology - Characterization of Functionalized Microspheres", 2008,Chem. Mater. 20, pp. 5375-5380

 

Stanford, N. Dunne D. and Li H., “Re-examining the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys”, 2008, Scripta Materilia, 58, Issue 7, 2008, pp. 583-586.

 

Thierry, B, Zimmer, L., McNiven, S., Finnie, K, Barbe, C and Griessert, HJ ‘Electrostatic self-assembly of PEG copolymers onto porous silica nanoparticles’ 2008, Langmuir, 24, pp.3143-8150.

 

Thorogood, G. J., Kennedy, B. J., Luca, V., Blackford, M. G., van de Geest, S. K., Finnie, K. S., Hanna, J. V. and Pike, K. J., 2008, Structure and dehydration of the pyrochlore system NaW2-yMoyO6+δnH2-zO between 10 and 675K., 2008, Journal of Physics and Chemistry of Solids, 69, 1632-1640

 

Thorogood, G. J., Kennedy, B. J., Ismunadar, Avdeev, M. and Kamiyam T. The stability of Na-doped Bi2(NbCr)O7−x pyrochlores: The non-existence of “(BiNa)(NbCr)O6 2008, Journal of Physics and Chemistry of Solids, 69, pp.918-922

 

Thorogood, G. J., Saines, P.J., Kennedy, B. J., Withers, R.L. and Elcomb, M.M. Diffuse scattering in the cesium pyrochlore CsTi0.5W1.5O6 Materials Research Bulletin, 43, pp. 787-795

 

Vance, E.R, Hadley J. H. and Hsu, F.H. Positron Annihilation Lifetime Spectroscopy of Off-Stoichiometric and Doped Gd2Ti2O7”, 2008, Journal of the American Ceramic Society, 91, pp.3756-3757

 

Vance, E.R., Hadley Jr., J.H., Hsu, F.H. & Drabarek, E., 2008, ‘Positron Annihilation Lifetime Spectra in a Metakaolin-based Geopolymer’, Journal of the American Ceramic Society, 91,pp 664–666

 

Wang, XD, Mitchell, DRG, Prince, K, Atanacio, AJ and Caruso, RA, ‘Gold nanoparticle incorporation into porous titania networks using an agarose gel templating technique for photocatalytic applications’, 2008, Chemistry of Materials’ 20, pp. 3917-3926

 

Wei, T., Carr, D.G., Li, H., Smith K. & Harrison R.P., 2008, ‘Surveillance of the fracture behaviour of Zircaloy-4 welds using the small punch test’, Journal of ASTM International, 5, Paper ID JAI101005 Available online only at www.astm.org

 

Withers, P.J., Turski, M., Edwards, L., Bouchard, P.J.& Buttle D.J., 2008, ‘Recent Advances in Residual Stress Measurement’, International Journal of Pressure Vessels and Piping, 75, pp. 118-127.

 

Whittle, K. R., Hyatt, N. C. and Reaney, I. M., 2008, Phase Transitions in Lanthanum Doped Strontium Bismuth Tantalate’ 2008, Chemistry of Materials 20, 6427-6433

 

Yang, B. and Luca, V. Enhanced Long Wavelength Transient Photoresponsiveness of WO3 Induced by Tellurium Doping’. 2008, Chemical Communications, 37, pp. 4454-4456

 

Yun, S., Attard, D., Davis, J., Li, H., Morricca S., Knott R. and Gadd, G.  “Spray dried microspheres as a route to clay/polymer nanocomposites”, 2008, Journal of Applied Polymer Science, 108, pp. 1550-1556

 

Yun, SI, Gadd, GE, Latella, BA, Lo, V, Russell, RA and Holden, PJ, ‘Mechanical properties of biodegradable polyhydroxyalkanoates/single wall carbon nanotube nanocomposite films’ 2008, Polymer Bulletin, 61, pp. 267-275

 

Yun, SI, Attard, D, Lo, V, Davis, J, Li, H, Latella, B, Tsvetkov, F, Noorman, H, Moricca, S, Knott, R, Hanley, H, Morcom, M, Simon, GP and Gadd, GE, 2008, Spray-dried microspheres as a route to clay/polymer nanocomposites., Journal of Applied Polymer Science., 108, pp.1550- 1556

 

Yun, SI, Gadd, GE, Lo, V, Gauthier, M., Munam, A. Temperature-Responsive Supramolecular Assembly and Morphology of Dendrigraft Micelles with a Solvophilic Core–Solvophobic Shell Structure’, 2008,  Macromolecules, 41, pp.7166-7172

 

Zanellato, O., Fitzpatrick, M.E., Daymond, M.R., Edwards, L. & Turski, M., 2008, ‘Development of Intergranular stresses during In-situ compression tests in Zircalloy-4’ Materials Science Forum, 571, pp. 149-154.

 

Zhang Y. & Vance, E.R., 2008, ‘Diffuse reflectance spectroscopy of tetravalent neptunium and plutonium in ThO2’, Journal of Nuclear Materials, 374, pp. 192-196.


Zhang, Y., & Vance, E.R., ‘Plutonium in Monazite and brabantite: Diffuse reflectance spectroscopy study’, Journal of Nuclear Materials, 375 (2008) 311-314.


Zhang, Y., Li, H., McGlinn, P.J., Yang, B. & Begg, B.D., ‘Stainless steel/glass-ceramic interactions under hot isostatic pressing (HIPing) conditions’, Journal of Nuclear Materials, 375 (2008) 315-322.

 

Zhang, Y., Li H. and Moricca, S., “Pyrochlore-structured titanate ceramics for immobilisation of actinides: hot isostatic pressing (HIPing) and stainless steel/waste form interactions,” 2008, Journal of Nuclear Materials, 377¨, pp. 470–475

 

Zhang, Z., Triani, G. and Fan, L. J., Amorphous to anatase transformation in ALD thin films induced by hydrothermal treatment at 120ºC 2008 Journal of Materials Research, 23, 2472-2479

 

Zhou, Q., Saines, P. J., Sharma, N., Ting, J., Kennedy, B. J., Zhang, Z., Withers, R. L. and Wallwork, K., 2008, Crystal Structures and Phase Transitions in A-site deficient Perovskites Ln1/3TaO3 Chemistry of Materials, 20, pp. 6666-6676.

 

Ziebell, A.L., Lim, W.H., Reinhard, M.I., Cornelius, I., Prokopovich, D.A., Siegele, R., Dzurak, A.S. and Rosenfeld, A.B., ‘Cylindrical Silicon-on-Insulator Microdosimeter: Charge Collection Characteristics’, 2008, IEEE Transactions on Nuclear Science., 5, 3414-3410